Purifiers – DIY and OEM

BYBEE QUANTUM PURIFIERS

The following product descriptions and suggested retail prices (MSRP) are listed here for informational purposes only.  Bybee Technologies web site does not sell direct to retail customers. To place a retail order CLICK HERE to find the nearest dealer.  If you are interested a system modification through one of our licensed partners, see our list at: Modifications and DIY Retail resellers on this web site. For DIY installation suggestions see DIY Guidelines.

 

Large REGULAR Quantum Purifier
This new product replaces the original Bybee Large Regular Quantum Purifier.  It has been re-designed and engineered to be smaller than the original model, yet is even more effective.   This product is made with 14 gauge copper leads, which is suitable for handling currents up to 15 amps.  The Large Regular Quantum Purifiers can be used in-line in most any signal application consistent with the current handling capacity. This product will reduce noise and improve the overall signal to produce better detail resolution and greater warmth and harmonic richness.   This product is included in the Speaker Bullet Kit, and is typically used on the negative leg.  Lower current applications should consider the Slipstream Quantum Purifiers.  Potentially higher currents should consider using the AC Bullet.

Body Length: 1 inch
New Regular Large PurifierDiameter: 1/3 inch
Leads: one inch, 14 gauge copper
Current-handling: 15 A
Voltage: >1000 V
Resistance: 0.025 ohm
MSRP:  $180 each (see pricing note below)

 

INTERNAL SPEAKER BULLET 

Theis new Internal Speaker Bullet is designed as an alternative or a complement to the Internal Speaker Bullet Kit.  This device has 1 inch long leads made of 14 gauge copper wire.  Designed and constructed with a higher level of treatment, this product delivers detail resolution, warmth and harmonic richness unsurpassed in our other purifiers.  This product is primarily designed for internal application inside of speakers between cross-over and terminals; and on the positive leg.  However, it can be used in same applications as Regular Large Purifiers when pricing is not an object.InternalSpeakerBullet

Body Length: 1 inch
Diameter: 1/3 inch
Leads: one inch, 14 gauge copper
Current-handling: 15 A
Voltage: >1000 V
Resistance: 0.025 ohm

MSRP:  $260 each (see pricing note below)

Large GOLD Quantum Purifier
Large Gold Quantum Purifiers are typically used in AC applications (especially recommended for solid-state electronics), and with loudspeaker transducers, especially electrostatic and metal-driver designs. Specially shielded using ERS Stealth carbon fiber material.

Length: 2 inchesLarge Purifier Gold
Diameter: 1/2 inch
Leads: one inch, 14 gauge 14K gold
Current-handling: 15 A
Voltage: >1000 V
Resistance: 0.025 ohm
MSRP:  $360 each  (see pricing note below)

 

Small COPPER Slipstream Quantum Purifier
Small COPPER Slipstream Quantum Purifiers are typically used in lower-current AC circuits, non-AC analog and digital circuits, and smaller mid-range drivers and tweeters.  This product is made with 18 gauge copper wire.  This product will reduce noise and improve the overall signal to produce greater resolution and definition with an organic touch.  Wire upgrades are available in silver and gold, which add another dimension to the improvements.  Higher current applications should consider Large Regular Purifiers or AC Bullet.

Body Length: 3/4 inchSm.CopperSlipstream
Diameter: 1/3 inch
Leads: one inch, 18 gauge copper
Current-handling: 4.3 A
Voltage: >1000 V
Resistance: 0.025 ohm
MSRP:  $100 each  (see pricing note below)

 

Small SILVER Slipstream Quantum Purifier
May be substituted for Copper Slipstream purifiers for enhanced performance in any application. Small SILVER Slipstream Quantum Purifiers are highly recommended for DIGITAL circuits, inputs and outputs.

Length: one half inchslipstream silver1
Diameter: 1/3 inch
Leads: one inch, 18 gauge silver
Current-handling: 4.3 A
Voltage: >1000 V
Resistance: 0.025 ohm
MSRP:  $180 each  (see pricing note below)

 

Small GOLD Slipstream Quantum Purifier 
Used for same applications as Copper and Silver Slipstreams, but add an unsurpassed musical tone and sweetness.  Small GOLD Slipstream Quantum Purifiers are especially recommended for modifying solid-state inputs and outputs, tweeters, and low current applications.

Length: one half inchslipstream gold 1
Diameter: 1/3 inch
Leads: 1.5 inch, 18 gauge 14 K gold
Current-handling: 4.3 A
Voltage: >1000 V
Resistance: 0.025 ohm
MSRP:  $250 each  (see pricing note below)

 

AC BULLET 
This new AC Bullet was designed to purify the incoming AC to be utilized in all types of equipment. Like all Bybee products, it is passive.  It is designed to handle spikes and current up to 20 amps.  Use is only limited to available space in the product being modified.  Made with 12 gauge copper wire and one inch leads, this AC Bullet conditions and improves all AC signal paths, delivering improvements to the performance of all components.  Typical uses include placement at IEC in component on positive leg.  Power conditioners, Amplifiers, DACs, and Pre-Amps will all benefit from this product.  In addition to audio, this product can also improve video.  Lower current applications can consider Large Regular Purifiers or Small Slipstream Purifiers.AC Bullet New

Body Length: 1 inch
Diameter: 1/2 inch
Leads: one inch, 14 gauge
Current-handling: 20 A
Voltage: >1000 V
Resistance: 0.025 ohm
MSRP:  $260 each  (see pricing note below)

 

SPEAKER BULLET KIT
This product kit is designed for OEM speaker manufacturers, audio modifiers and DIY hobbyists seeking a higher level of speaker performance.  This Speaker Bullet Kit will deliver stunning improvement in detail retrieval, ambience and spatial presentation, vocal and instrumental color, transient and dynamic impact, and harmonic completeness.  It is designed to be installed internally in the speakers and placed after the speaker terminals and before the crossover network.  The Internal Speaker Bullet Kit is an equally high-performance alternative to the critically acclaimed Plug-in Speaker Bullets product.  SpeakerBulletKit

Each Internal Speaker Bullet Kit contains two Internal Speaker Bullets for the positive legs and two Large Regular Purifiers for the negative legs. The Positive elements are the Internal Speaker Bullet (shown below) with one-inch leads. The Negative elements, for maximum sonic performance and quieting on the return leg of the connection, are the Large Regular Quantum Purifier (shown above).

One package of the Internal Speaker Bullet Kit treats a pair of single-wired loudspeakers. Bi-wire speakers require two Kits. For the audiophile who demands the absolute best performance attainable, a Positive and Negative pair may be installed right at each transducer rather than just before the crossover network after the binding post.

MSRP: $800.00 per Kit  (see pricing note below)

 

 

 

Pricing Note:  Price listed is suggested retail price.  Dealer’s should contact Bybee Technologies for actual wholesale cost and quantity discounts.

All specifications subject to change without notice.